You must be logged in as an administrator when installing this program.
The directory name cannot include spaces or any of the following characters after the colon:
The directory name cannot include any of the following characters after the colon:
The group name cannot include any of the following characters:
(c) 2001 FirstStop WebSearch, LLC. All rights reserved.
< &Back
&Browse...
Cancel
&Finish
&Install
&Next >
N&o to All
Yes to &All
Setup Needs the Next Disk
Click Finish to exit Setup.
Click Next to continue, or Cancel to exit Setup.
Click Next to continue, or Cancel to exit Setup.
Compact installation
%1 KB
%1 MB
Current selection requires at least [mb] MB of disk space.
The system indicates that the following shared file is no longer in use by any programs. Would you like for Uninstall to remove this shared file?
If any programs are still using this file and it is removed, those programs may not function properly. If you are unsure, choose No. Leaving the file on your system will not cause any harm.
Remove Shared File?
Confirm
Are you sure you want to completely remove %1 and all of its components?
Custom installation
Uninstall %1
The directory:
does not exist. Would you like the directory to be created?
Directory Does Not Exist
folder
directory
The directory:
already exists. Would you like to install to that directory anyway?
Directory Exists
The program requires at least [mb] MB of disk space.
Setup requires at least %1 KB of free space to install, but the selected drive only has %2 KB available.
Do you want to continue anyway?
Not Enough Disk Space
Click Retry to try again, Ignore to proceed anyway, or Abort to cancel installation.
An error occurred while trying to change the attributes of the existing file:
An error occurred while trying to copy a file:
Setup was unable to create the directory "%1"
An error occurred while trying to create a file in the destination directory:
DDE: Command was not successful
DDE: Error during "execute" transaction (code: %1)
DDE: Error during "request" transaction (code: %1)
Unable to execute file:
%1 failed; code %2
%1 failed
%1 failed; code %2.
Error creating INI entry in file "%1".
Internal error %1
An error occurred while trying to open the README file.
An error occurred while trying to read the existing file:
An error occurred while trying to read the source file:
Error creating registry key:
%1\%2
Unable to register the DLL/OCX: %1
DllRegisterServer export not found
Unable to register the type library: %1
Error opening registry key:
%1\%2
Error writing to registry key:
%1\%2
An error occurred while trying to rename a file in the destination directory:
An error occurred while trying to replace the existing file:
Setup was unable to restart the computer. Please do this manually.
RestartReplace failed:
Thunk failed; code %1.
Error
Unable to create a file in the directory "%1" because it contains too many files
The existing file is newer than the one Setup is trying to install. It is recommended that you keep the existing file.
Do you want to keep the existing file?
The existing file is marked as read-only.
Click Retry to remove the read-only attribute and try again, Ignore to skip this file, or Abort to cancel installation.
Setup is not complete. If you quit now, the program will not be installed.
You may run the Setup program again at another time to complete the installation.
Exit Setup?
Exit Setup
Click Retry to try again, Ignore to skip this file (not recommended), oGR
r Abort to cancel installation.
Click Retry to try again, Ignore to proceed anyway (not recommended), or Abort to cancel installation.
The file already exists.
Would you like Setup to overwrite it?
The file "%1" could not be located in "%2". Please insert the correct disk or select another %3.
Setup has finished installing [name] on your computer. The application may be launched by selecting the installed icons.
Setup has finished installing [name] on your computer.
To complete the installation of [name], Setup must restart your computer. Would you like to restart now?
To complete the installation of [name], Setup must restart your computer.
Would you like to restart now?
Full installation
Setup will add the program's icons to the following %1 group.
The password you entered is not correct. Please try again.
When you are ready to continue with Setup, click Next.
Please read the following important information before continuing.
When you are ready to continue with Setup, click Next.
Please read the following important information before continuing.
Information
Please wait while Setup is installing [name] on your computer.
The drive you selected does not exist. Please select another.
You must enter a full path with drive letter; for example:
C:\APP
Error %2: %3
Unable to create a temporary file. Setup aborted
Unable to execute file in the temporary directory. Setup aborted
Please read the following important information before continuing.
Please read the following License Agreement. Use the scroll bar or press the Page Down key to view the rest of the agreement.
Do you accept all the terms of the preceding License Agreement? If you choose No, Setup will close. To install [name], you must accept this agreement.
You must enter a group name.
&Don't create any icons
&Don't create a %1 group
&No, I will restart the computer later
This program will not run on %1.
Setup has detected that the following components are already installed on your computer:
Deselecting these components will not uninstall them.
Would you like to continue anyway?
Components Exist
This installation can only be uninstalled by a user with administrative privileges.
This program must be run on %1.
&Password:
This installation is password protected. Please provide the password.
Passwords are case-sensitive.
This installation is password protected.
Please provide the password. Passwords are case-sensitive.
&Path:
Start Menu
Program Manager
Setup is now ready to begin installing [name] on your computer.
Click Install to continue with the installation, or click Back if you want to review or change any settings.
Click Install to continue with the installation.
Selected Components:
Destination directory:
Program group:
Additional tasks:
Setup Type:
Run %1
View %1
Select the components you want to install, clear the components you do not want to install:
Select Directory
Please specify the location of the next disk.
Please insert Disk %1 and click OK.
If the files on this disk can be found in a %2 other than the one displayed below, enter the correct path or click Browse.
Select the %1 you would like Setup to install [name] to:
Select the additional tasks you would like Setup to perform while installing [name]:
Setup was not completed.
Please correct the problem and run Setup again.
Setup has detected that %1 is currently running.
Please close all instances of it now, then click OK to continue, or Cancel to exit.
Setup
The setup files are corrupted. Please obtain a new copy of the program.
The setup files are corrupted, or are incompatible with this version of Setup. Please correct the problem or obtain a new copy of the program.
The file %1 is missing from the installation directory. Please correct the problem or obtain a new copy of the program.
This will install %1. Do you wish to continue?
Setup - %1
File name:
Location:
Yes, I would like to view the README file
The source file "%1" does not exist
The source file is corrupted
Creating directories...
Creating program icons...
Creating INI entries...
Creating registry entriesF
Extracting files...
Registering files...
Saving uninstall information...
Uninstalling %1...
Setup cannot install to a UNC pathname. If you are trying to install to a network, you will need to map a network drive.
%1 Uninstall
Uninstall
"%1" file is corrupted. Cannot uninstall
%1 was successfully removed from your computer.
%1 uninstall complete.
Some elements could not be removed. These can be removed manually.
Uninstall has detected that %1 is currently running.
Please close all instances of it now, then click OK to continue, or Cancel to exit.
File "%1" does not exist. Cannot uninstall.
Please wait while %1 is removed from your computer.
An unknown entry (%1) was encountered in the uninstall log
The uninstall log file "%1" is in a format not recognized by this version of the uninstaller. Cannot uninstall
Welcome to the [name] setup program. This will install [name/ver] on your computer.
It is strongly recommended that you close all other applications you have running before continuing. This will help prevent any conflicts during the installation process.
Welcome to the [name] setup program.
This will install [name/ver] on your computer.
It is strongly recommended that you close all other applications you have running before continuing. This will help prevent any conflicts during the installation process.
This program cannot be installed on %1 version %2 or later.
This program requires %1 version %2 or later.
Setup Completed
Information
Information
Setup Status
License Agreement
Password
Ready to Install
Select Destination Directory
Select Components
Select Program Group
Select Additional Tasks
Uninstall Status
Welcome
&Yes, restart the computer now
Inno Setup Setup Data (1.3.25) with ISX (1.3.25)
FirstStop WebSearch 4.0
FirstStop WebSearch 4.0
FirstStop WebSearch.
Copyright c 2000-2003 FirstStop WebSearch, LLC
FirstStop WebSearch, LLC"
http://www.firststopwebsearch.com/
http://www.firststopwebsearch.com/
{pf}\BrushGroup\FS WebSearch 4
FirstStop WebSearch 4
Uninstall FS WebSearch 4.0
setup4@
{\rtf1\ansi\ansicpg1252\deff0\deflang1033\deflangfe1049{\fonttbl{\f0\fswiss\fprq2\fcharset0 Arial;}{\f1\froman\fprq2\fcharset0 Times New Roman;}}
{\*\generator Msftedit 5.41.15.1503;}\viewkind4\uc1\pard\nowidctlpar\qc\cf1\b\f0\fs24 Brush Systems Group, Incorporated\par
(BRUSH SYSTEMS GROUP, INC.)\par
as authorized and acting for\par
FirstStop WebSearch, LLC\par
\cf0\fs28 FirstStop WebSearch\'99 Standard Edition License Agreement\par
\b0\par
\pard\nowidctlpar\fs20 YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE INSTALLING THIS SOFTWARE. INSTALLING THIS SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD PROMPTLY RETURN THIS SOFTWARE, ALONG WITH YOUR RECEIPT, TO THE MERCHANT FROM WHOM YOU OBTAINED THE PRODUCT AND YOUR MONEY WILL BE REFUNDED. THIS AGREEMENT CONSTITUTES THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN YOU AND BRUSH GROUP CORPORATION (BRUSH SYSTEMS GROUP, INC.) ("LICENSER") WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT.\par
\fs24\par
\b\fs20 TYPES OF LICENSES. \par
\b0 In order to install and use the Software, you must obtain one of the following two types of licenses:\fs24\par
\pard\nowidctlpar\fi-360\li720\fs20 1.\tab Non-Commercial Use License,\fs24\par
\fs20 2.\tab Commercial Use License.\fs24\par
\pard\nowidctlpar\fs20 To qualify for a Non-Commercial Use License, You must:\fs24\par
\pard\nowidctlpar\fi-360\li720\fs20 1.\tab use the Software solely on a system under the Microsoft operating system (whether for commercial or non-commercial use), or\fs24\par
\fs20 2.\tab use the Software for non-commercial purposes as defined herein and be a Non-Commercial Entity as defined herein, or\fs24\par
\fs20 3.\tab be an Excluded Contractor as defined herein.\fs24\par
\pard\nowidctlpar\fs20 The term "Non-Commercial Entity" is limited to the following: universities or other educational institutions (such as pre-schools, elementary schools, middle or junior high schools, high schools, and community or junior colleges), non-profit organizations (such as public libraries, charities, and other organizations created for the promotion of social welfare), "Education Affiliated Users," and individual users who use the Software for personal use (such as connecting to an Internet Service Provider for personal use, hobby, recreational,, or educational purposes).\fs24\par
\fs20 The term "Education Affiliated Users" is limited to students, faculty members, researchers, administrators, support staff, and employees of a university or other educational institution. The term "Excluded Contractor" is limited to independent, solo contractors while performing work for a Non-commercial Entity, such as a university or other educational institution in an individual capacity. If You qualify for a Non-Commercial Use License, You may use the Software free of charge.\fs24\par
\fs20 If you do not qualify for a Non-Commercial Use License, then you must obtain a Commercial Use License. \fs24\par
\b\fs20\par
GRANT OF LICENSE.\b0 \par
You may use the Software only under one of the following two types of licenses at any time:\par
\fs24\par
\b\fs20 COMMERCIAL USE LICENSE\b0\fs24\par
\fs20 Provided that you have selected and paid the required license fee(s) for a Commercial Use License, and subject to the terms and conditions contained herein, BRUSH SYSTEMS GROUP, INC.hereby grants to you, an end user, a non-transferable, non-exclusive, non-sublicensable license to install and use the software for commercial purposes only on the number of compu
ters paid for by you. You agree that upon termination of your Commercial Use License, you will cease using the Software, destroy any copies that you have made, and remove the Software from your computers.\fs24\par
\b\fs20\par
NON-COMMERCIAL USE LICENSE\b0\par
Provided that you have selected and qualify for a Non-Commercial Use License as specified above, and subject to the terms and conditions contained herein, BRUSH SYSTEMS GROUP, INC., hereby grants to you, an end user, a personal, non-transferable, non-exclusive, non-sublicensable license to install and use the Software, free of charge, for non-commercial purposes only but if you are an Excluded Contractor (as defined above), for commercial and non-commercial purposes. \fs24\par
\fs20 For the avoidance of doubt, the following are considered examples of commercial uses of the Software, unless you are using the Software solely at a Non-Commercial Entity, or as an Excluded Contractor, as defined above:\par
(1) use at or for a commercial enterprise;\par
(2) use for financial gain, personal or otherwise;\par
(3) use by government agencies;\par
(4) use by a telecommunication or Internet service provider company;\par
(5) use at home or while traveling for work for which You will be paid;\par
(6) use in connection with administering a commercial web site;\par
(7) use in connection with the provision of professional services for which you are compensated (including paid system administration); and\par
(8) bundling or integrating the Software with any hardware product or another software product for commercial purposes.\fs24\par
\fs20 BRUSH SYSTEMS GROUP, INC. and/or its licensors reserve all rights not expressly granted to You herein. This license is not a sale of the Software or any copy of the Software. The Software contains valuable trade secrets of BRUSH SYSTEMS GROUP, INC. and its licensors. All worldwide ownership of and all rights, titles and interests in and to the Software, and all copies and portions of the Software, including without limitation, all intellectual property rights therein and thereto, are and will remain exclusively with BRUSH SYSTEMS GROUP, INC.. The Software is protected, among other ways, by the copyright laws of the United States and international copyright treaties. All rights not expressly granted herein are retained by BRUSH SYSTEMS GROUP, INC., and its licensors.\fs24\par
\b\fs20\par
OWNERSHIP.\b0 The SOFTWARE is owned by BRUSH SYSTEMS GROUP, INC. or its suppliers and is protected by United States copyright laws and international treaty provisions. Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e. a book or musical recording) except that you may either (a) make one copy of the SOFTWARE solely for backup or archival purposes, or (b) transfer the SOFTWARE to a single hard disk provided you keep the original solely for backup or archival purposes. You may not copy the written materials accompanying the software.\fs24\par
\b\fs20\par
OTHER RESTRICTIONS.\b0 You may not rent or lease the SOFTWARE, but you may transfer the SOFTWARE and accompanying written materials on a permanent basis provided you retain no copies and the recipient agrees to the terms of this Agreement. You may not reverse engineer, decompile, or disassemble the SOFTWARE. If SOFTWARE is an update, any transfer must include the update and all prior versions.\fs24\par
\b\fs20 LIMITED WARRANTY.\b0 \par
BRUSH SYSTEMS GROUP, INC. warrants that (a) the SOFTWARE will perform substantially in accordance with the accompanying written materials for a period of 90 days from the date of receipt; and (b) any hardware accompanying the SOFTWARE will be free from defects in materials and workmanship under normal use and service for a period of one year from the date of receipt. Any implied warranties on the SOFTWARE and hardware are limited to 90 days and one (1) year, respectively. Some states do not allow limitations on duration of an implied warranty, so the above limitation may not apply to you.\fs24\par
\b\fs20\par
CUSTOMER RE
K"sMEDIES.\b0 \par
BRUSH SYSTEMS GROUP, INC.'s entire liability and your exclusive remedy shall be, at BRUSH SYSTEMS GROUP, INC.'s option, either (a) return of the price paid or (b) repair or replacement of the SOFTWARE or hardware that does not meet BRUSH SYSTEMS GROUP, INC.'s Limited Warranty and which is returned to BRUSH SYSTEMS GROUP, INC. with a copy of your receipt. This Limited Warranty is void if failure of the SOFTWARE or hardware has resulted from accident, abuse, or misapplication. Any replacement SOFTWARE will be warranted for the remainder of the original warranty period or 30 days, whichever is longer. THESE REMEDIES ARE NOT AVAILABLE OUTSIDE OF THE United States of America.\fs24\par
\b\fs20\par
MAINTENANCE, SUPPORT AND UPDATES. \par
\b0 BRUSH SYSTEMS GROUP, INC. is under no obligation to maintain or support or update the Software in any way, or to provide updates or error corrections. Subject to the terms and conditions herein and provided that You have paid any applicable license and other fee(s), if you are a Commercial Use licensee, you will receive software updates (as BRUSH SYSTEMS GROUP, INC., in its sole discretion, releases from time to time), technical support via email, phone, and the web for certain time periods set by BRUSH SYSTEMS GROUP, INC.. For further information, go to http://www.brushgroup.com/support.\fs24\par
\b\fs20\par
NO OTHER WARRANTIES.\b0 \par
BRUSH SYSTEMS GROUP, INC. disclaims all other warranties, either express or implied, including but not limited to implied warranties of merchant ability and fitness for a particular purpose, with respect to the SOFTWARE, the accompanying written materials, and any accompanying hardware. This limited warranty gives you specific legal rights. You may have others, which vary from state to state.\fs24\par
\b\fs20\par
NO LIABILITY FOR CONSEQUENTIAL DAMAGES.\b0 \par
In no event shall BRUSH SYSTEMS GROUP, INC. or its suppliers be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arising out of the use of or inability to use this BRUSH SYSTEMS GROUP, INC. product, even if BRUSH SYSTEMS GROUP, INC. has been advised of the possibility of such damages. Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.\fs24\par
\b\fs20\par
TERMINATION. \par
\b0 This Agreement will terminate immediately and automatically without notice if you breach any provision in this Agreement. Upon termination you will remove all copies of the Software or any part of the Software from any and all computer storage devices and destroy the Software. At BRUSH SYSTEMS GROUP, INC. request, You or your authorized signatory, will certify in writing to BRUSH SYSTEMS GROUP, INC. that all complete and partial copies of the Software have been destroyed and that none remain in your possession or under your control. The provisions of this Agreement, except for the license granted warranty, will survive termination.\fs24\par
\b\fs20 U.S. GOVERNMENT RESTRICTED RIGHTS.\b0 \par
The Software and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFAR 252.227-7013 or subparagraph (c)(1) and (2) of the Commercial Computer Software - Restricted Rights at 48 CFR 52.227-19 of FAR, or Clause 18 52.277-86(d) of NASA Supplement to the FAR, as applicable. Manufacturer is BRUSH SYSTEMS GROUP, INC., 13628 San Antonio Rd, Atascadero, CA. 93422.\fs24\par
\b\fs20\par
EXPORT LAW. \par
\b0 You acknowledge and agree that the Software may be subject to restrictions and controls imposed by the United States Export Administration Act (the "Act") and the regulations thereunder. You agree and certify that neither the Software nor any direct product thereof is being or will be acquire
Vd, shipped, transferred, or reexported, directly or indirectly, into any country, except pursuant to an export control license under the Act and the regulations thereunder, or will be used for any purpose prohibited by the same. By using the Software, You are acknowledging and agreeing to the foregoing, and You are representing and warranting that You will comply with all of the United States and other applicable country laws and regulations when either exporting or re-exporting or importing the Software or any underlying information technology. Further, You represent and warrant that You are not a national of Cuba, Iran, Iraq, Libya, North Korea, Sudan or Syria or a party listed in the U.S. Table of Denial Orders or U.S. Treasury Department's list of Specially Designated Nationals.\fs24\par
\b\fs20\par
GOVERNING LAW. \par
\b0 This Agreement is governed by the laws of the State of California without regard to conflict of laws rules and principles. Application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded.\fs24\par
\b\fs20\par
MISCELLANEOUS.\b0 \par
If any provision hereof shall be held illegal, invalid or unenforceable, in whole or in part, such provision shall be modified to the minimum extent necessary to make it legal, valid and enforceable, and the legality, validity and enforceability of all other provisions of this Agreement shall not be affected thereby. No delay or failure by either party to exercise or enforce at any time any right or provision hereof shall be considered a waiver thereof or of such party's right thereafter to exercise or enforce each and every right and provision of this Agreement. This Agreement will bind and inure to the benefit of each party's permitted successors and assigns. You may not assign this Agreement in whole or in part, without BRUSH SYSTEMS GROUP, INC.'s prior written consent. Any attempt to assign this Agreement without such consent will be null and void. This Agreement is the complete and exclusive statement between You and BRUSH SYSTEMS GROUP, INC., relating to the subject matter hereof and supersedes all prior oral and written and all contemporaneous oral negotiations, commitments and understandings of the parties, if any. In the case of any conflict between the terms of this Agreement and the provisions of any purchase order for the Software, the terms of this Agreement shall control.\cf2\par
\cf0\f1\par
\b\f0 DISCLAIMER\b0\par
\b Notice:\b0 The FirstStop WebSearch Standard\'99 Edition is free for noncommercial use, while the FirstStop WebSearch\'99 Deluxe and Visual Edition are for sale for both commercial and noncommercial use. Not all features are included in each edition of FirstStop WebSearch\'99. For a feature listing per product, see www.FirstStopWebSearch.com. \par
\b\par
Notice:\b0 Search sources are provided as samples and are not endorsements of any particular search engine or resource. FirstStop WebSearch, LLC and Brush Systems Group, Inc. do not warrant or guarantee that FirstStop WebSearch\'99 is suitable for any particular search source. \par
Some search source connectors are created and distributed by users and developers not related to FirstStop WebSearch, LLC and/or Brush Systems Group, Inc. The FirstStop WebSearch\'99 software features an open interface with an open specification to allow the public to create search engine connectors and for users of the software to import search connectors from the Internet. \par
FirstStop WebSearch, LLC and Brush Systems Group, Inc. do not monitor, control, maintain, or claim ownership of publicly created search connectors; accordingly, they accept no responsibility relating to the use of these search source connectors. We do provide, as a convenience only, pre-installed links in our search engine update to sources of publicly created search engine connectors that we are made aware of. But we do not qualify or review the integrity of the creators or their products. You, as a user, have the ability to add or remove these links. \par
Since search engines frequently change their usage policy we highly recommend that you review your intended search source's usage policy before using or purchasing FirstStop WebSearch\'99. By using FirstStop WebSearch you agree to release FirstStop WebSearch, LLC and Brush Systems Group, Inc. from any liability relating to the improper or illegal use of FirstStop WebSearch\'99.\f1\par
(.txt)